Peel and Stick PVC Edge Banding

Peel and stick pvc edge banding is made of polyvinyl chloride as the main material, and the appearance has wood grain, marble, cloth grain, etc. The picture is bright and smooth, with the realism and three-dimensionality of wood.

It refers to the process of sealing the cutting surface of the artificial board. The cutting surface of the artificial board is usually sealed by mechanically bonding the edge sealing material with the artificial board.

Therefore, it can also be simply understood as the process of "artificial board + edge banding material + mechanical bonding".

The bonding process mainly refers to the mechanical bonding method in the process of mechanically bonding the edge sealing material to the cut section of the artificial board. It can usually be divided into three categories: EVA edge sealing, PUR edge sealing and laser edge sealing.
 

EVA edge sealing, also known as hot melt adhesive edge sealing, is a white particle bead-like substance that is applied through heating. EVA edge sealing generally uses double the amount of glue for pur edge sealing, so it is easy to overflow and crack when exposed to high temperatures. Not recommended for kitchen use.

Advantages: Cheap price, simple process, high popularity
Disadvantages: The glue is applied by heating and is prone to cracking when exposed to high temperatures. It is not recommended for use in kitchens or humid spaces.
Affected by temperature, it is prone to cracking and glue overflow and has poor durability.
The amount of glue used is large and there are obvious glue lines. The glue lines are easy to turn yellow and accumulate dust. The texture is poor, and the waterproofness is also average. It is not friendly to light-colored boards. It has poor durability, environmental protection, poor flatness and aesthetics.

Laser edge sealing is performed with special edge banding tape.
There is a laser photosensitive activation material on the back, and the coating is activated under the action of the laser to reach the state of welding.
The welding degree between the coating and the board is high. Even if the edge banding is artificially peeled off, the coating remains.
It is edge-sealed without glue, and its environmental performance is the best among the three.

Advantages:Smooth and beautiful, with high saturation; no glue leakage, environmentally friendly and durable; rich color, saturation and texture; strong waterproof and long service life.
Disadvantages: The price is relatively expensive

Pur edge sealing uses German Pur liquid glue, which has strong viscosity. The glue line is a little thinner than EVA, but the usage amount is less than half of EVA. It is mainly cured by moisture and is not easily affected by temperature and causes cracking. It has very strong stability.

Advantages: It absorbs moisture in the air for curing, so you don't have to worry about getting damp at all and is highly moisture-proof; it uses better materials, using environmentally friendly glue with a small amount of glue; it has good stability and will not be affected by temperature and will not crack; both in terms of firmness and appearance The speed is better than eva

Disadvantages: The process technology and aesthetics are second only to laser edge sealing; the same high-quality glue is more expensive, and the price of pur glue of the same brand is more expensive than eva glue.

Hot Tags: peel and stick pvc edge banding, China peel and stick pvc edge banding manufacturers, suppliers, factory, pvc edge banding for poolside furniture, flexible pvc edge band, edge banding to cover edges, waterproof vinyl edge band, edge banding for contemporary furniture, edge banding for spa furniture